Fortinet

Fortinet Lab 1

I have used fortigate firewall on my eve-ng emulator. I am planning to add some labs about it. Lets start it. This is a basic template for a starting point, below

Step 1. Prepare your lab

You can download fortinet image from its website as kvm and import your eve-ng emulator.

Use these command to configure interfaces and internet access, below

Step 2. Configure interfaces

Use these command to configure interfaces and internet access, below. You can adjust it regarding to your home network.

##configuration of port 1 and 2

config system interface
edit port1
set ip 192.168.1.155 255.255.255.0
set allowaccess ping https ssh http
end

config system interface
edit port2
set ip 172.27.2.155 255.255.255.0
set allowaccess ping https ssh http
end

=======================================

##static route to access the internet

config router static
edit 1
set device port
set gateway 192.168.1.1

##test connectivity
execute ping 8.8.8.8

Now, I need to access the internet. Therefore, NAT configuration should be done. Interface should be defined as inside or outside. Source and destination packet types also are defined, shown below.

I added a role definition for port2 as LAN interface and assigned DHCP server role, below.

Check your static route for the internet connection. 192.168.1.1 is my modem IP address through which Fortigate firewall on my eve-ng topology will access to internet.

Step 3. Internet connection

It is time to test the internet connection. I prefer to use docker which is lightweight and fast. Then, check your data packets on it. FortiView>>All Sessions